From a China-based Manufacturer, I’m proud to present the {PET Bottle With Alumium Lid}. This bottle is made of high‑quality PET resin, food‑grade and BPA-free, designed for beverages, cosmetics, and nutraceuticals. I know B2B buyers need consistent weight, precise neck finish, and reliable lid seal, so I teamed a tight cap-thread with an aluminum lid that provides a premium feel and strong barrier against light. Our line is engineered for easy filling and fast labeling, with uniform wall thickness for shrink sleeves and heat induction seals. We pack in standard sizes and offer customization in cap color, cap insert, and volume. Based in China, I am a Manufacturer who cares about supply chain stability, on-time delivery, and compliant packaging standards. If you want samples or a catalog, just tell me your target markets, MOQ, and batch size. I aim to help your brand stand out with sustainable packaging and cost-effective solutions.
Lightweight PET bottles paired with precision aluminum lids offer global buyers a premium, practical packaging solution. The PET body provides clarity, impact resistance and food-grade safety while the aluminum lid adds superior barrier performance, corrosion resistance and a secure seal that preserves flavor and extends shelf life. Sleek finishes and tight tolerances also support branding and tamper evidence for sensitive products. Partnering with experienced manufacturers ensures consistent quality through automated production lines, inline testing and internationally recognized certifications. Scalable capacity, customizable neck finishes, colors and printing, plus optimized logistics and sustainable material choices, make these bottles a reliable, cost-effective option for global supply chains seeking performance and compliance.
| Product Model | Capacity (ml) | Neck Finish (mm) | PET Grade (IV dL/g) | Lid Material | Barrier / Coating | Typical Weight (g) | Oxygen Transmission Rate (OTR) | CO2 Retention | Drop Test (cm) | Recommended Fill Temp (°C) | Typical Applications | Compliance & Standards |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cyl-500 | 500 | 28 | 0.76 | Aluminum (anodized) | SiOx inner coating (inorganic barrier) | 18 | OTR < 3 cm³/m²·day (typical, ASTM F3136) | High | 100 | 4–25 (cold-fill) | Bottled water, ready-to-drink beverages | FDA 21 CFR, EU 10/2011, ISO 9001 (material-level) |
| Slim-330 | 330 | 28 | 0.75 | Aluminum (lacquered interior) | Thin EVOH layer (co-extruded) | 14 | OTR ≈ 1–4 cm³/m²·day (depending on EVOH thickness) | Very High | 95 | 4–25 (cold-fill) | Carbonated soft drinks, sparkling water | FDA 21 CFR, EU 10/2011, HACCP-compliant processes |
| Sport-750 | 750 | 38 | 0.80 | Aluminum (pressed cap) | Internal polymer liner + lacquer | 28 | OTR < 5 cm³/m²·day (measured by modified ASTM) | Moderate | 120 | 4–30 (cold-fill) | Sports drinks, electrolyte formulations | FDA 21 CFR, EU 10/2011 |
| WideMouth-1000 | 1000 | 48 | 0.82 | Aluminum (wide cap, food-grade lacquer) | Multilayer PET with EVOH (enhanced barrier) | 36 | OTR < 2 cm³/m²·day (EVOH enhanced) | High | 110 | up to 85 (hot-fill compatible when specified) | Juices, sauces, condiments (hot-fill variants) | FDA 21 CFR, EU 10/2011, BRC-packaging guidance |
| Clear-250 | 250 | 24 | 0.72 | Aluminum (thin single-piece) | None (clarity optimized PET) | 11 | OTR ≈ 4–6 cm³/m²·day (standard PET) | Low-Moderate | 85 | 4–25 (cold-fill) | Functional beverages, samples | FDA 21 CFR, EU 10/2011 |
| FoilSeal-150 | 150 | 20 | 0.70 | Aluminum (with polymer sealing liner) | Aluminum lid + induction-seal option | 9 | OTR < 1 cm³/m²·day at closure interface (with induction seal) | Excellent (sealed) | 80 | up to 90 (with appropriate PET grade) | Pharmaceutical liquids, high-barrier sample packs | FDA 21 CFR, EU 10/2011, ISO 15378 (for pharma packaging compatibility) |
| Eco-Light-400 | 400 | 28 | 0.74 | Aluminum (recyclable lacquer) | Lightweight PET design, optimized ribbing | 12 | OTR ≈ 3–5 cm³/m²·day (lightweight variant) | Moderate | 90 | 4–25 (cold-fill) | Still beverages, chilled teas | FDA 21 CFR, EU 10/2011, recyclability guidance (PET) |
