As a China-based manufacturer, I supply the 300ml PET Bottle for brands looking to scale production with reliable packaging. I design and deliver high-clarity, BPA-free PET bottles suitable for beverages, cosmetics, and personal care. Our 300ml PET Bottle features lightweight design, compatible with standard caps, tamper-evident seals, and child-resistant options; it’s food-grade, recyclable, and resistant to impact. I offer crisp crystal clarity, consistent wall thickness, and customizable neck finishes, colors, and labeling to fit your branding. Fast quoting, flexible MOQs, and scalable production help me meet your demand in China and abroad. I work with manufacturers who need dependable supply, tight tolerances, and reliable delivery timelines. Lead times are short, and I can accommodate tight product launches with dedicated line runs. If you’re seeking a trusted packaging partner, I’m ready to discuss your bottle size, cap style, and print options for your market.
A reliable 300ml PET bottle OEM partner turns product ideas into market-ready solutions by offering end-to-end support—from concept and mold design to sampling, production, and global delivery. Lightweight, fully recyclable and adaptable for beverages, personal care or household products, these bottles can be tailored with custom neck finishes, colors, barrier coatings, printing, labeling and secondary packaging to meet your brand and regulatory requirements. Rigorous quality control, traceable materials and flexible minimum order quantities help procurement teams balance cost, lead time and compliance across international markets. To serve global buyers, a turnkey approach coordinates design validation, pilot runs, scalable manufacturing and logistics, ensuring on-time delivery and consistent quality at scale. Sustainability options, efficient supply-chain planning and multilingual project management streamline approval cycles and reduce time-to-shelf, making it straightforward to bring a differentiated 300ml PET bottle to market with confidence.
| Specification | Typical Value / Range | Notes |
|---|---|---|
| Nominal internal volume | 300 mL | Standard nominal capacity (±2%) |
| Material | Polyethylene terephthalate (PET) – injection stretch-blow molded | Food-contact grade; rPET compatible |
| Typical empty weight (tare) | ≈ 9.0 – 12.5 g | Depends on preform design and wall distribution |
| Height (overall) | ~135 – 165 mm | Measured to top of finish; profile dependent |
| Maximum diameter | ~55 – 65 mm | Should fit standard bottle carriers and packing trays |
| Neck finish / Thread | 28 mm (28-400) common; other finishes possible | Compatibility with standard closures and tamper bands |
| Inner neck diameter (approx.) | ≈ 18 – 21 mm | Affects flow rate and filler nozzle selection |
| Wall thickness (average) | ~0.45 – 0.90 mm | Varies by section (shoulder/base/body) |
| Recommended label area | Wrap: 100 x 60 mm (approx.) / Front: 60 x 40 mm | Depends on bottle profile and decoration method |
| Compatible decoration methods | Shrink-sleeve, roll-fed UV flexo, digital label, hot-stamp | Choose by run length and graphics requirement |
| Filling temperature | Cold-fill: 4–60°C; Heat-set PET: up to 90–95°C | Select heat-set if hot-fill or pasteurization is required |
| Operating temperature range | -10°C to +40°C (filled & ambient); short-term exposure higher | Avoid prolonged exposure above 40°C for dimensional stability |
| Barrier characteristics (material level) | Oxygen transmission rate (OTR): ~1–5 cm3/m2·24h; CO2 transmission higher | Actual shelf-life effect depends on wall thickness and total surface |
| Recyclability | Fully recyclable PET; compatible with rPET streams | Design for recycling: avoid multi-material labels or coatings |
| Manufacturing tolerances | Dimensional tolerance ±1.5–3% ; volume tolerance ±2% | Tighter tolerances available with additional validation |
| Typical mold type | Multi-cavity injection stretch-blow mold (4–24 cavities) | Cavity count chosen by production volume and cycle time |
| Sample & prototyping lead time | 3–14 days for 3D/rapid prototypes; 1–3 weeks for first article samples | Depends on tooling and decoration complexity |
| Typical mass-production lead time | 4–10 weeks after tooling approval (varies by order size) | Includes preform procurement, blowing, and decoration |
| Applicable approvals & standards | Food contact: FDA, EU 10/2011 (typical material compliance) | Certification evidence provided per project upon request |
| Common end uses | Beverages (water, juice, soft drinks), condiments, personal care samples | Design configurable for branding and barrier needs |
